SAE J1487 Rating Air-Conditioner Evaporator Air Delivery and Cooling Capacities

作者:标准资料网 时间:2024-05-19 03:47:21   浏览:9573   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1487
Title:Rating Air-Conditioner Evaporator Air Delivery and Cooling Capacities
Issuing Committee:Truck And Bus Windshield Wipers And Climate Control Comm
Scope:The purpose of this SAE Recommended Practice is to establish uniform test procedures for measuring and rating air delivery and cooling capacity of truck cab air-conditioner evaporator assemblies. It is the intent to measure only the actual cooling capacity of the evaporator. It is not the intent of this document to rate and compare the performance of the total vehicle air-conditioning system.This procedure is designed to provide truck manufacturers and air conditioning system suppliers with a cost-effective, standardized test method and calculations for measuring and rating air delivery and cooling capacity of truck cab air-conditioner evaporator assemblies. This procedure relates to HFC-134a (R-134a) refrigerant system.
下载地址: 点击此处下载
【英文标准名称】:MOUNTINGOFMILLINGCUTTERS,KEYDRIVE.GENERAL.
【原文标准名称】:栓传动铣刀安装.安装图
【标准号】:NFE66-202-1972
【标准状态】:作废
【国别】:法国
【发布日期】:1972-11
【实施或试行日期】:1972-10-25
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:机动工具;组装;机械传动系统;规范;机床;尺寸公差;尺寸;键传动装置;铣刀
【英文主题词】:dimensionaltolerances;specifications;dimensions;assembling;machinetools;power-operatedtools;millingcutters;keydrives;mechanicaltransmissionsystems
【摘要】:
【中国标准分类号】:J41
【国际标准分类号】:
【页数】:1P;A4
【正文语种】:其他


基本信息
标准名称:钢铁及合金 硫含量的测定 次甲基蓝分光光度法
英文名称:Iron steel and alloy - Determination of sulfur content -Methylene blue spectrophotometric method
中标分类: 冶金 >> 金属化学分析方法 >> 钢铁与铁合金分析方法
ICS分类: 冶金 >> 黑色金属 >> 黑色金属综合
替代情况:替代GB 223.67-1989
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-05-13
实施日期:2008-11-01
首发日期:1989-03-31
作废日期:
主管部门:中国钢铁工业协会
提出单位:中国钢铁工业协会
归口单位:全国钢标准化技术委员会
起草单位:中国钢研科技集团公司
起草人:杨桂香、滕璇
出版社:中国标准出版社
出版日期:2008-08-01
页数:11页
计划单号:20063491-T-605
书号:155066·1-32346
适用范围

GB/T 223的本部分规定了次甲基蓝光度法测定钢铁及合金中的硫含量。
本部分适用于钢铁及合金中质量分数为0.0003%~0.01%硫含量的测定。铌、硅、钽和钛对硫的测定有干扰。 本部分代替GB/T223.67—1989《钢铁及合金化学分析方法 还原蒸馏次甲基蓝光度法测定硫
量》,与其相比较,主要做了以下修改:
———测定范围由0.001%~0.030%调整为0.0003%~0.01%;
———“用溴使硫氧化,并蒸发驱尽硝酸”改为“用高氯酸冒烟氧化,并驱赶硝酸”;
———试料量由1.0000g调整为根据含量不同分别为0.50g和1.0g;
———蒸馏和提纯装置有所改动。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过GB/T223 的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
ISO377-2:1989 样品和锻造钢材试样的选择与制备 第2部分:化学成分测定用样品
ISO385-1:1984 实验室玻璃仪器 滴定管 第1部分:基本要求
ISO648:1977 实验室玻璃仪器 单标线移液管
ISO1042:1983 实验室玻璃仪器 单标线容量瓶
ISO3696:1987 分析实验室用水规格及检验方法
ISO5725:1986 测量方法的精密度 通过实验室间试验确定标准测量方法的重复性和再现性

所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 冶金 黑色金属 黑色金属综合