DIN VDE 0710-11-1968 工作电压低于1kV的照明配件规范.第11部分:嵌入式信号灯接头规范规则

作者:标准资料网 时间:2024-04-26 13:13:50   浏览:9805   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Specificationsforlightingfittingswithservicevoltagesbelow1000V;Specificationrulesforflush-fittingsignal-lightfittings
【原文标准名称】:工作电压低于1kV的照明配件规范.第11部分:嵌入式信号灯接头规范规则
【标准号】:DINVDE0710-11-1968
【标准状态】:现行
【国别】:德国
【发布日期】:1968-05
【实施或试行日期】:1968-05-01
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:封盖物;热稳定性;信号灯;接线端;灯具;漏电路径;电气工程;定义
【英文主题词】:leakagepaths;luminaires;definitions;thermalstability;electricalengineering;definition;covers;electricterminals;signallamps
【摘要】:
【中国标准分类号】:K73
【国际标准分类号】:29_140_40
【页数】:3P;A4
【正文语种】:德语


下载地址: 点击此处下载
基本信息
标准名称:钢铁及合金化学分析方法 硫氰酸盐直接光度法测定钢量
英文名称:Methods for chemical analysis of iron steel and alloy; The thiocyanate direct photometric method for the Determination of molybderum content
中标分类: 冶金 >> 金属化学分析方法 >> 钢铁与铁合金分析方法
ICS分类: 冶金 >> 黑色金属
替代情况:替代GB 223.26-1984;被GB/T 223.26-2008代替
发布部门: 中国钢铁工业协会
发布日期:1989-03-31
实施日期:1990-07-01
首发日期:1984-03-27
作废日期:2008-11-01
主管部门:中国钢铁工业协会
归口单位: 全国钢标准化技术委员会
起草单位:长城钢厂
出版社:中国标准出版社
出版日期:1990-07-01
页数:4页
适用范围

本标准规定了用硫氰酸盐直接光度法测定钼量。本标准适用于中低合金钢、高温合金和精密合金中钼量的测定。测定范围:0.10%~2.00%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 冶金 黑色金属
MIL-P-223C, MILITARY SPECIFICATION: POWDER, BLACK (05 FEB 1993) [MIL-P-00223C USED IN LIEU OF MIL-P-223B]., This specification is approved for use by the US ArmyArmaments, Munitions and Chemical Command, based uponcurrently available technical information but it has notbeen approved for promulgation as a coordinated revisionof MIL-P-223B. It is subject to modification. However,pending its promulgation as a coordinated militaryspecification, it may be used in acquisition.